Huitian Distributor

Auto windshield sealant for a clean, lasting bond

We are a distributor of Huitian windshield adhesive and sealant: one-component polyurethane products for car, machinery-cab and marine glass. We have 10 years of experience in adhesives and ship to South Korea, Russia and Europe. Ask us about our windshield adhesive and sealant, technical data sheets and samples.

Request a quote See products
Windshield bonding cross-section Cross-section showing glass, ceramic frit, primer, polyurethane bead and the body flange. Glass Ceramic frit Primer Polyurethane bead Body flange
Windshield bonding: the polyurethane bead joins the glass to the body flange and seals the edge.

Windshield adhesive and sealant range

Two one-component, moisture-curing polyurethane products: one for assembling and bonding glass, one for caulking and sealing.

Huitian windshield glass adhesive

  • One-component polyurethane
  • Black
  • 300 ml or 400 ml cartridge
  • Shelf life 9 months

One-component, black, low-viscosity, high-strength and low-odor polyurethane adhesive for assembling and bonding the windshield glass of cars, engineering-machinery cabs and ships. It also suits bonding and sealing of some metal structural parts. The cured layer stays elastic and tolerates temperature change and stress.

Technical data
Chemistry
One-component moisture-curing polyurethane
Color
Black
Density
1.35 g/cm³
Tensile strength (ISO 527)
4.0 MPa
Elongation at break (ISO 37)
400%
Shear strength (ISO 4587)
2.0 MPa
Temperature resistance
-40 °C to 90 °C (120 °C for up to 1 h)
Packaging
300 ml or 400 ml cartridge
Shelf life
9 months at 5–25 °C

Huitian windshield polyurethane sealant

  • Solvent-free
  • Low odor, TVOC ≤ 50 ppm
  • UV-resistant
  • 600 ml cartridge

One-component, high-thixotropy, non-flowing, solvent-free, low-odor and UV-resistant polyurethane sealant for caulking and sealing passenger car windshields. It is easy to apply by hand, stays in place on vertical and overhead joints, and resists the flow of black water better than general glass gap-filling sealants.

Request the data sheet
Technical data
Chemistry
One-component moisture-curing polyurethane
Color
Black
Density
1.33 g/cm³
Tack-free time
20–50 minutes
Hardness (Shore A, ISO 48-4)
42
Elongation at break (ISO 37)
500%
Shear strength (ISO 4587)
2.0 MPa
TVOC (VDA 277)
≤ 50 ppm
Temperature resistance
-40 °C to 90 °C
Packaging
600 ml cartridge
Shelf life
6 months at 5–25 °C

Huitian surface cleaner and primer system

Surface preparation for both products: new glass and body paint are cleaned with the recommended cleaner, then primed with the primer that matches your substrate under Huitian’s primer program. Ask us which primer suits your glass and body.

Technical data
Use
Cleaning and priming before bonding
Data sheet
On request
Packaging
On request

Other automotive adhesives

Huitian’s automotive range also includes assembly adhesives, glue for car parts and aftermarket products. If you need something beyond windshield products, tell us the application and we will source it for you.

Ask about other products

Values are typical, not specifications, and real values may vary. Always check the current technical data sheet. Test on your actual substrates before use. These products are intended for experienced, professional users.

Why buy from us

We are your single point of contact for Huitian products: one quotation, one order, and export to your country.

  • One supplier for your automotive adhesives

    Windshield products and Huitian’s other automotive adhesives, such as assembly adhesives, glue for car parts and aftermarket products, in one order.

  • Flexible service

    ODM, custom packaging and order arrangements are discussed case by case. Tell us what you need and we will quote.

  • Quality checks before shipment

    We help keep quality under control: goods and packaging are checked before they leave.

  • Direct line to the manufacturer

    Huitian builds its sales through distribution partners. We work with its team directly, and help match the right adhesive, sealant, cleaner and primer to your job.

  • Export experience and fast replies

    10 years in adhesives, shipping to South Korea, Russia and Europe. We reply within 24 hours, and data sheets, safety data sheets and samples are available on request.

  • Made by one of China’s largest adhesive manufacturers

    Huitian was founded in 1977 and is publicly listed (stock code 300041). With large-scale production, stable supply and more than 2,000 products, it sells in more than 40 countries and regions.

Factory visit

Photos from a visit to Huitian’s exhibition hall, production site and control room. Select a photo to enlarge it.

Exhibition hall with a scale model of Huitian’s production bases.
Tour of the production site.
Production control room at a Huitian plant.
Showroom wall of brands the manufacturer works with. Logos belong to their owners.

How to apply windshield adhesive

A general overview based on the manufacturer’s guidance. Always follow the technical data sheet and the vehicle manufacturer’s instructions.

Diagram of adhesive application areas on a passenger car, including windshield glass bonding and glass sealing
Adhesive application areas on a passenger car. For windshield glass, ask us about our windshield adhesive (bonding) and sealant (caulking and sealing).

  1. Clean the surfaces

    The glass and body paint must be dry and free of oil, dust and grease. Clean new glass and the paint coat with the recommended cleaner and check that the bonding surfaces are intact.

  2. Apply primer

    Apply the primer that suits your substrate with a primer applicator, and start gluing only after it has evaporated and dried.

  3. Lay the bead

    Use a pneumatic or electric glue gun. For the adhesive, form a triangular bead so the bond line has an even thickness. Work at 20–30 °C and 50–70% relative humidity if you can.

  4. Set the glass

    Position the glass while the adhesive is still open. Do not assemble once the adhesive has gone tack-free. Open time is much shorter in heat and high humidity.

  5. Let it cure

    Both products cure with moisture, and cure more slowly in the cold. Keep the adhesive away from chemicals that contain hydroxyl or amino groups, which can stop it curing.

Windshield sealant questions

What is auto windshield sealant?

Auto windshield sealant, also called windshield adhesive or urethane, is a polyurethane compound used to bond or seal automotive glass to the vehicle body and keep out water and air.

What is the difference between windshield adhesive and windshield sealant?

A windshield adhesive is used to assemble and bond the glass. A windshield sealant is used for caulking and sealing the windshield and resists the flow of black water.

Can I use silicone instead of windshield adhesive?

No. Windshield bonding relies on polyurethane products made for the job. General-purpose silicone is not a substitute.

How should windshield adhesive be stored?

Store in a cool, dry place at 5 to 25 °C. Shelf life is 9 months for the adhesive and 6 months for the sealant under these conditions, and shorter at higher temperatures. Reseal unused cartridges immediately.

How long until the vehicle can be driven?

Cure time depends on temperature, humidity and bead size. Both products are moisture-curing and cure more slowly in the cold. Follow the technical data sheet and the vehicle manufacturer’s instructions.

Which countries do you ship to?

We ship to South Korea, Russia and Europe. Ask us about other destinations.

How long does delivery take?

Products are made to order. Lead time depends on the product, quantity and packaging, and is confirmed in your quotation.

Do you offer ODM and custom packaging?

Yes. ODM and custom packaging are available on request. Send us your requirements, and we will confirm the details in your quotation.

Can you supply other automotive adhesives?

Yes. Besides windshield products, we can source Huitian’s other automotive adhesives, such as assembly adhesives, glue for car parts and aftermarket products. Tell us the application and we will confirm what is available.

Do you offer samples and technical data sheets?

Yes. Contact us for technical data sheets, safety data sheets, samples and packaging information.

Request a quote or samples

Products are made to order. Prices, minimum order quantities and lead times are quoted per inquiry. Tell us the product, quantity and destination country, and we will reply with a quotation and data sheets.

Email us

CompanyNanyang Zhizhou International Trading Company
Emailysun686381@gmail.com
Phone+86 150 0185 8551
WeChat15001858551
Business hoursReplies within 24 hours